Recessed Stair Dek Dot™ LED Lights Kit 10 Pack

(3 customer reviews)

Starting At: $319.22 USD

Dek Dots™ install completely flush with the surface and are now available in a “stair” version that angles the light 30 degrees down to illuminate your steps while minimizing glare.  These waterproof LED lights are perfect for decks, hot tub stairs, pavilions, and more.


LED Recessed Down Lights for Both Indoors & Outdoors
These low voltage lights are easy to install, virtually flush with the surface, and hardly visible. They can be installed almost anywhere for attractive down lighting, so long as they’re embedded in wood or composite materials. They can be installed outdoors in the ceiling of an overhang above a deck or patio, under a deck railing, or in a porch overhang. Inside, find creative uses for these lights as recessed cabinet lighting or closet lights. No matter where you choose to put these lights, the installation will be a breeze with our detailed instructions. Indoor and Outdoor Lighting
There aren’t many lights out there that can both withstand outdoor conditions and stay low profile enough to look good inside your home. Our LED recessed down lights make a great addition anywhere on your property. LED Green Technology
LEDs require up to 80% less energy than traditional light sources, so using our LED downlights will accrue energy and money savings over the lifetime of the product. Dimmable Warm White Light
Our downlights cast warm white light and share the same light spectrum as other DEKOR® lighting products (3200° K). Control the light intensity and create an atmosphere by using a DEKOR® WIFI controller with your project. Long-Lasting and Durable Lighting Options
The lights are waterproof, weatherproof, and salt air resistant. The housing is made of Alodine coated aircraft-grade aluminum. The housing has a powder-coated finish with built-in UV protection, making it long-lasting and durable. All our recessed lights are backed by an industry-leading 10-year / 30-year warranty.

Additional information

Weight 5 lbs
Dimensions 10 × 10 × 2 in

ETL Listed, CE (Europe)

Country of Origin

Made in the USA


DEKOR Lighting

Color Temperature



0.900 in


0.680 in

Light Output (Standard)

18 Lumens

Light Output (NexGen)

72 Lumens



Watt Usage (Standard)


Watt Usage (NexGen)



12 volt DC



Cord Type


Cord Length

6" Pigtail w/ female Plug-N-Play

3 reviews for Recessed Stair Dek Dot™ LED Lights Kit 10 Pack

  1. Dennis N. (verified owner)

  2. Dana Camarillo (verified owner)

    This is my second deck addition using the Dekor deck lights. They are absolutely stunning and we get so many compliments

  3. Simon S. (verified owner)

    The installation was simple. Make sure you measure the distance between the splitters because the kit comes with a 5′ wire if the distance is greater you will have to order the longer wire. Be careful plugging in the male female connectors make sure the prongs line up. The standard LED stair lights put out out plenty of light. So far I’m very happy with the lights.

Only logged in customers who have purchased this product may leave a review.

Outdoor Dek Dot™ Stair Kit Package Contents:

(10) Angled LED Dek DotTM Lights
(12) 5’ Plug-N-Play cables
(1) Custom Ground Forstner Bit with depth stop
(1) EZ Outdoor Waterproof Power Driver (36 watts, upgradable)
(1) EZ Photocell Timer
(1) EZ Waterproof Low Voltage / LED Dimmer with Teachable Remote
(1) 20’ Transconnect cable
(3) 6-Port Plug-N-Play splitters
(10) Mounting screws for transformer, controller, and splitters
(2) Packets of dielectric grease
(1) Installation Instructions

Our low voltage lights are powered by 12VDC. Please use this guide to select the correct DEKOR® power supply for the number of lights you plan on using.
Transformer Transformer Wattage Maximum # Lights Maximum # NexGen Lights
EZ 36 25 19
EZMAX 60 39 31
EZMAXC 100 64 52
EZMAX200 200 128 105
If you are adding these lights to an existing system, or are building a new system with multiple types of lights, please use our Transformer Calculator.

It’s as easy to install Dek Dots in stairs or other vertical surfaces as installing them horizontally. Check out the video below to watch a quick installation of our classic Dek Dots: (Installation Tutorial)

Download Plug-N-Play Deck Lighting Installation Instructions as a PDF.

Download Hard Wire Deck Dot Installation Instructions as a PDF.

For best results, these should be used in stair risers that are 3/4″ thick or greater.

Note: Please review our transformer calculator prior to purchase if you will be adding additional lights to your circuit.

Wiring Guide

Click here for most current information: WARRANTY POLICY.

You may also like…