EZ Motion Controller+ (PIR ONLY)
$43.21 USD
EZ MOTION CONTROLLER+ (PIR Only) Timer, photocell, motion control all in one unit. Easy to install, completely waterproof.
With the DEKOR® EZ Motion Control+ you can now control your lights without using a switch. The EZ Motion Controller+ is completely programmable; has a 360º PIR (Passive Infrared) lens motion sensor, an ambient light sensor for greater light sensitivity that a traditional photocell, and is completely waterproof (IP67). All that in a small ½” x 1 ¾” diameter, powder coated, antique metal black*, aluminum case.
The EZ Motion Controller receiver unit connects directly with DEKOR® Plug N Play connectors to our complete line of 12VDC LED lights. Made in the USA, our EZ Motion Controller + is built to last with a cast aluminum housing and is waterproof.
Just connect your lights to the receiver(s) and use them at the top and bottom of stairs, beginning and end of hallways, entrances and exits of rooms, closets, cabinets, anywhere you want to have lights turn on or off based on movement or light.Set how bright you want the lights; set the duration they stay on; even the sensitivity.
With the DEKOR® EZ Motion Control+ you can set the sensitivity of the PIR so that your pets won’t set off the lights or you can set the sensitivity so they can. Add an element of safety to your outdoor lighting by having the lights turn on if someone comes into your yard. Save on energy bill by having your lights stay on only when there’s movement or when it’s dark. You take control of how your light operates inside and outside of your property with the EZ Motion Controller+.
Program up to 9 PIR motion control receivers with the EZ Motion Remote. If you have any questions on how the EZ Motion Controller+ works or how to determine how many receivers you need, just give DEKOR® customer care a call at 1-800-258-0344.
*For other color options please contact Customer Care to special order at 1-800-258-0344.
| Color | Antique Metal Black 05, Oil Rubbed Bronze 07, Hammered White 01 |
|---|
3 reviews for EZ Motion Controller+ (PIR ONLY)
Only logged in customers who have purchased this product may leave a review.
1 Programmable EZ MOTION CONTROLLER+ PIR Receiver (Color: Antique Metal Black)
The Motion Controller+ factory settings are:
- Motion Sensitivity – 100% MAX (25’ range at room temperature)
- Sensitivity is programmable based on desired detection distance
- Brightness – 60% (Lights turn on at last brightness level lights were at)
- Duration – 60 min. (Upon activation lights remain on for time selected)
- Duration is programmable – from 1 minute to 999 minutes
- Zones – No zone assigned (No zones needed if only using 1 receiver)
- Zones are programmable – When using more than one receiver it is recommended that each receiver is programmed as a zone
The EZMOTIONPIRONLY receiver comes with two screws for installation.You must connect the PIR receiver to power from the transformer and then the lights to the receiver.
REMEMBER: Do not mount behind obstructions or plants. Motion detector and light sensor must not be obstructed.
Click here for EZMOTIONCONTROLLER+ Programming/Operation Instructions.
1 Year Warranty When Used Exclusively With DEKOR® Transformers. Warranty void when used with any other brand of transformer. 30 Year Warranty on Powder Coat Finish.
WILLIAM JEFFREYS (verified owner) –
RICK M. (verified owner) –
Ryan Thomas (verified owner) –