EZ Motion Controller+ – (Remote Only)
$28.56 USD
EZ MOTION CONTROLLER+ (Remote Only). Manually operate or program the EZ Motion Controller+ PIR with this remote control. With large backlit keypad make programming and operation quick and easy. Set brightness, duration, and sensitivity. Turn lights on and off, dim lights manually, set up zones.
With the DEKOR® EZ Motion Control+ you can now control your lights without using a switch. The EZ Motion Controller+ is completely programmable; has a 360º PIR (Passive Infrared) lens motion sensor, an ambient light sensor for greater light sensitivity that a traditional photocell, and is completely waterproof (IP67). All that in a small ½” x 1 ¾” diameter package.
The EZ Motion Controller+ remote control unit allows you to manually control or to program the PIR unit. In other words, this handheld device allows you to have full manual control over your lights, Turn them on or off, dim or brighten your lights and if you have more than one PIR it allows you to select the zone you want to control. The handheld remote unit is also what you use to program your PIR. Program zone, set up set PIR sensitivity, set duration you want lights to stay on before they turn off, set brightness that lights turn on to when triggered by the PIR.
Just connect your lights to the receiver(s) and use them at the top and bottom of stairs, beginning and end of hallways, entrance, and exits of rooms, closets, cabinets, anywhere you want to have lights turn on or off based on movement or light.
With the DEKOR® EZ Motion Control+ you can set the sensitivity of the PIR so that your pets won’t set off the lights or you can set the sensitivity so they can. Add an element of safety to your outdoor lighting by having the lights turn on if someone comes into your yard. Save on energy bill by having your lights stay on only when there’s movement or when it’s dark. You take control of how your light operate inside and outside of your property with the EZ Motion Controller+.
Program up to 9 PIR motion control receivers with the EZ Motion Controller+ Remote. If you have any questions on how the EZ Motion Controller+ works or how to determine how many receivers you need, just give DEKOR® customer care a call at 1-800-258-0344.
1 review for EZ Motion Controller+ – (Remote Only)
Only logged in customers who have purchased this product may leave a review.
1 Programmable EZ MOTION CONTROLLER+ PIR Receiver
The Motion Controller+ factory settings are:
- Motion Sensitivity – 100% MAX (25’ range at room temperature)
- Sensitivity is programmable based on desired detection distance
- Brightness – 60% (Lights turn on at last brightness level lights were at)
- Duration – 60 min. (Upon activation lights remain on for time selected)
- Duration is programmable – from 1 minute to 999 minutes
- Zones – No zone assigned (No zones needed if only using 1 receiver)
- Zones are programmable – When using more than one receiver it is recommended that each receiver is programmed as a zone
The EZMOTIONPIRONLY receiver comes with two screws for installation.You must connect the PIR receiver to power from the transformer and then the lights to the receiver.
REMEMBER: Do not mount behind obstructions or plants. Motion detector and light sensor must not be obstructed.
Click here for EZMOTIONCONTROLLER+ Programming/Operation Instructions.
WILLIAM JEFFREYS (verified owner) –
Too many buttons and the instructions are not detailed enough.