Our Petite post lamps were originally designed to be used on deck posts. They have since been used quite effectively as wall lighting and as soffit lighting. With full 360° rotation and a light angle of 35°, you can direct the light by simply turning the light in the mounting hole.
Full 360° rotation allows for easy customization in areas that are poorly lit, which truly makes this a very versatile product. great option for lighting walkways and stairs. Indoor uses include uplighting above fireplaces or inside of cabinet lighting. DIMMABLE. MADE IN THE USA
Additional information
Weight
1 lbs
Dimensions
6 × 4 × 2 in
Color Temperature
3200K
Light Output
35 Lumens
Light Output (NexGen)
72 Lumens
Material
Cast Aluminum
Power Draw
0.5 Watts
Power Draw (NexGen)
1.2 Watts
Voltage
12 volt DC
Waterproof
Yes
Wire Leads
6 in pigtail w/ female Plug-N-Play
2 reviews for Outdoor Petite Post Lamp Kit
Rated 5 out of 5
STEVEN H. (verified owner)–
Rated 4 out of 5
Eric G. (verified owner)–
Would have been 5/5, but apparently I was sent the wrong Forstner bit which resulted in a very loose fit that required caulk to hold the lamp in place.
Only logged in customers who have purchased this product may leave a review.
Outdoor Petite Post Lamp Kit Contents
This Outdoor LED Post Light Kit contains:
( 8 ) LED Light Elements in UP/DOWNLIGHT configuration with 5′ Plug-N-Play Cables
( 8 ) LED Housings in your choice of 7 different colors
( 8 ) Directional Light Petite snap-on diffuser discs
( 1 ) Custom Ground Forstner Bit
( 1 ) EZ Photocell Timer (dusk to dawn Timer) with variable timed off settings
( 1 ) EZ Outdoor Waterproof Power Driver (36 watt) with the capacity to light (30) LED Light Elements
( 1 ) PLUG-N-PLAY 5’ Junction Cable
( 2 ) 6-Port PLUG-N-PLAY Splitters
( 10 ) Mounting Screws
( 1 ) Installation Instructions
The power supply/transformer included with this kit supports up to THIRTY (30) Petite Lamps. If you are ordering additional Petite Lamps with your kit you can select an upgrade your transformer when you purchase online.
NOTE: Longer Plug-n-Play and Transformer connector cables available along with in-line and T-splitters – please see Accessories.
Sir, I wanted to write and thank you for the high-quality American made hardware you offer. I installed 10 of the Petite lights on my deck posts over the past several weeks and have received numerous comments and inquiries on the lights and installation. Thanks again for making a great product.
DEKOR® offers a COLORKONNECT WiFi controller and through the app you can dim the lights, change colors, and set schedules. You may also control light colors with dimming capability manually on the front face of the COLORKONNECT WiFi device.
The 3W4PORT splitter/repeater has two functionalities: the splitter is used to connect the power wire and the three additional ports for 2-3 lights based on your lighting plan. The repeater is to be used every 20’ with long cable runs and at the light connections to enhance the signal creating pure colors from the first light to the last.
Yes, you can add to your current non-RGBW DEKOR® lighting system by adding RGBW lights! While the non-RGBW DEKOR lighting system is a 2-wire direct current system, and the RGBW DEKOR lighting system is a 3-wire direct current system, you are able to integrate both systems by creating a separate zone. Either using a splitter running from you current transformer or upgrading to a 100 or 200 watt transformer, which has more than one output from the transformer, you can create an additional zone or zones. Please call us if you need us to walk you through this!
The transconnect cable is for our standard DEKOR® Lighting 2-wire lights. The COLORCONNECT WiFi controller is a 3-wire system. The male-to-male cables come in lengths of 20”, 5’, 10’, 20’ are to be used to connect the COLORCONNECT WiFi controller and then to your first light.
For our RGBW system: The 36-watt and the 60-watt transformers will include one (1) 20’ 3WPNP male-to-male cable. The 100-watt transformer will come with (1) transconnect cable and (1) 20’ 3WPNP male-to-male cable. The 200-watt transformer will include (1) 20’ transconnect cable with two lead wires and (1) 20’ 3WPNP male-to-male cable.
The 3W4PORT splitter/repeater may only be used with the RGBW system. The 6-port splitter is a two wire and can only be used with our standard DEKOR® Lighting system.
STEVEN H. (verified owner) –
Eric G. (verified owner) –
Would have been 5/5, but apparently I was sent the wrong Forstner bit which resulted in a very loose fit that required caulk to hold the lamp in place.