Recessed Dock Dot™ LED Lights
These DEKOR® Dock Dot™ 1” diameter, waterproof, LED, dot style lights, are a great way to expand the LED lighting on your dock. As part of our Plug-N-Play system, our Dock Dot™ is easy to install. All connections are waterproof and come with dielectric grease to make sure your connections stay that way.
- ETL certifications
- CREE LEDs
- Waterproof, Weatherproof, and Salt Air Resistant
- Plug-N-Play Connector System- No Electrician Needed
- NexGen High Output LED option
- Controller and Transformer options
- 10 Year Warranty
- Made in the USA
The Dock Dot™ is completely enclosed in a high impact polycarbonate case that is completely sealed making it water tight. You can use this little light to outline your dock, accent a slip, and with our optional red and green port and starboard lights, you can totally make your dock safe and easy to navigate.
Available in both Standard (38 lumens) or NexGen (78 lumens) LED configurations our Dock Dots™ will make your waterside dock stand out. You can connect Dock Dots with any of our other world-class products, like our post lamps and post caps to truly create a complete low voltage, LED lighting design that will take your dock to another level.
Dimmable warm white light. Dock Dot™ LEDs emit light at 3200° K and are dimmable with DEKOR’s EZDIMMERWP or their WiFi Dimmer and app.
Safe and Certified. Dock Dot™ LEDs are safety rated and meet ETL, CE and RCM/CTick safety standards.
Long lasting and durable. Dock Dot™ LEDs are extremely strong, will not rust, and can are built tough. Dock Dot™ LEDs have thick transparent domed poly-carbonate covers that will not yellow with age. The lights are built to withstand years of “wear and tear” and come with an industry leading 10-year warranty.
CREE® LEDs Dock Dot™s are built with high-quality CREE LEDs, known for their super bright light, long life and superior energy efficiency. DEKOR® is a CREE® LEDs Branding Partner.
NexGen™ Lighting Option. Dock Dot™ LEDs may be purchased with DEKOR’s standard LED configuration or with new 3X brighter NexGen™ LEDs. NexGen™ LEDs feature CREE® Advanced XT series LEDs and some smart electronics that allow a far greater light output with minimal power consumption.
Connector Cable Length. This kit comes with 10 foot or 20-foot heavy duty Plug-N-Play cables so lights can be spaced along the edge of your dock as desired.
Bret S. (verified owner) –
Really like these lights as do my customers
Ruth (verified owner) –
Thinking a bit beyond the intended, I wanted to put a light in a 14 inch lighthouse for my koi pond’s island. However, I needed something small that would go inside and the dot light looked like it would work, and it does work better than the light I had in the lighthouse for years. Yes, it goes a bit contrary to directions, but 2 dots now light the darkness I hated for months. The waterfall to the left has a spotlight on it, but the lighthouse adds so much – wish I could figure out how to send you a picture – I’m not too good with my new windows 10. Thanks so much for your help with my order and quick delivery. – Ruth
Rakesh Kurl (verified owner) –
Anonymous (verified owner) –
Stephen L. (verified owner) –
The Dock Dot lighting is a great product. Easy to install, perfect for marking the edges at night and it does not take up room on the walkway like torch lights would. The Cree led’s are just bright enough to be functional without being blinding.
2 suggestions. For installation if your using the 20’ cable option, order a couple of 10’ cables for any shorter intervals you might have and have a 3/4 paddle bit to drill out the hole for the wiring. Instructions call for 3/8” bit but, not close to big enough to fit the light’s wire crimp through. Also buy additional outdoor wire clamps, Dekor does not supply enough with the kit.
Great product from a reasonable price to quality standpoint.
Ronald Rhodes (verified owner) –
Great product and your customer service is the best.
Roland (verified owner) –
Michael L. (verified owner) –
The product is excellent and the application I used the product for turned out beautifully. As a DIY guy, I found the installation instructions didn’t match the product that was delivered. I also found the Forstner bit dull and time consuming. Good thing I had my own set to speed up the process. After drilling the hole with the Frostner bit the next step involved drilling a hole to run the wires. The hole size specified would not allow the wires to pass through because of a large wire joiner running from the light. To accommodate the wire joiner, I had to drill a 3/4″ hole to receive the wires and joiner. Furthermore, after going on line to view videos, the examples in the videos didn’t match the product received. Re-think your instructions and installation videos and you get five gold stars from me.
james h. (verified owner) –
Thomas M. (verified owner) –
Rob Brandt (verified owner) –