No products in the cart.
Xtreme Bond Polyurethane Adhesive Cartridge 29 Oz
Starting At: $11.41 USD
Extra strength stone and concrete adhesive for landscape and masonry pros. XTREME Bond Polyurethane Adhesive 29 Oz. permanently bonds pavers, stone, brick, concrete and cement blocks. All temperatures, wet or frozen surfaces.
Extra Strength Stone & Concrete Adhesive 29 oz for Block, Masonry, and Building Materials
Xtreme Bond™ Adhesive is a premium quality, high strength adhesive for stone, concrete, and other building materials. Designed for landscape and masonry pros, Xtreme Bond is known for its quick adhesion, fast cure, and ability to be used on wet or frozen surfaces and at extreme temperatures. It produces a permanent and unyielding bond overnight to almost any substrate under a wide range of temperature and moisture conditions. Use with pavers, concrete and cement blocks, capstones, brick, stone, slate, lumber, metal and more. Build stable, strong structures and make efficient repairs with Xtreme Bond™ Extra Strength Stone & Concrete Adhesive.
The adhesive is a one-component premium polyurethane adhesive manufactured for Hardscape Depot™ by a recognized leader in the industrial coatings and adhesives industry. This superior bonding construction adhesive is weatherproof and can be used for multiple surfaces including brick, cement and concrete blocks, retaining walls, lumber and more. Features:
- Easy to use
- Permanent overnight bond
- Up to 3 times the strength of conventional adhesives
- Bond is typically stronger than the materials being bonded
- Long open time allows repositioning before bonding
- Use in extreme temperatures
- Sub-freezing up to 250° F
- Wet and Frozen Surfaces
- Quick adhesion and fast cure
- Will not crack or lose bond over time
- Adhesive dries a light tan color
Xtreme Bond Adhesive reacts and cures with airborne moisture forming a formidable bond between the surfaces. It has incredibly quick adhesion and fast cure. It is formulated for difficult installation temperatures both hot and cold extremes and will adhere to both wet or frozen surfaces where others fail.
This adhesive permanently bonds a wide variety of construction materials – masonry, concrete, stone, brick, wood, metal and even fiberglass – with outstanding results. The 29 oz. size is suitable for contractors/pros/larger jobs. You can also buy Xtreme Bond Adhesive in a 10.5 oz. cartridge.
The cartridge is designed to be used with our 13″ Caulking Gun.
| Compliance | ASTM D 3498, FHA Bulletin UM-60, meets or exceeds all requirements of the American Plywood Association Specification AFG-01, Adhesive for Gluing Plywood to Wood Framing |
|---|---|
| Composition | High-solids polyurethane elastomer that cures by reaction with atmospheric moisture |
| Freeze/thaw stability | Does not freeze |
| Not recommended for: | Under water applications |
| Recommended for | Most rigid building materials: brick, concrete, stone, pavers, masonry, treated and untreated lumber, metal, plywood, fiberboard, cement board |
| Service Temperature | Up to 250 ° F |
| Shelf Life | 1 year when properly stored |
| Shrinkage | None |
| VOC | 0.38 lbs/gal, less water and exempt solvents |
| Working or open time | Up to 1 hour |
Only logged in customers who have purchased this product may leave a review.
For Best Results
- Wear gloves during application of adhesive; once cured, material cannot be removed.
- If adhesion to a material is unknown or in question, you should do a test application first.
- Do not use in applications that require continuous submersion.
- Do not use in applications where temperatures rise above 250 ° F.
Surface Preparation
All surfaces must be structurally sound, clean, and free of dirt, loose particles, oil, grease, asphalt, tar, paint, wax, rust, waterproofing or curing and parting compounds, and membrane materials.
METAL
Remove scale, rust or other coatings to expose a bright white surface.
CONCRETE, STONE, MASONRY
Clean by grinding, sandblasting or wire brushing to expose a sound surface free of contamination and laitance.
LUMBER, WOOD
The surface must be clean and sound. Scrape away paint to bare wood.
Priming
HD Xtreme Bond Adhesive Caulk bonds well to most substrates; however, it is the user’s responsibility to check the adhesion of the cured adhesive on specific substrates.
Application
- Apply by caulking gun or trowel.
- Wearing gloves during application is highly recommended. Once Xtreme Bond has cured it cannot be removed.
- Because of the high strength provided by Xtreme Bond adhesive, do not apply it as heavily as you would a conventional adhesive. Cut the smallest possible opening in the spout to render the appropriate-sized bead. Be certain to fill all gaps between materials.
- Materials may be repositioned without loss of adhesive strength up to one hour after application.
- When necessary use mechanical fasteners to hold materials in place until the adhesive has fully cured.
Curing
Xtreme Bond forms a firm set in 1 – 2 hours, and a tenacious bond overnight. Cure time varies with temperature, humidity, and the porosity of the materials joined.
Clean Up
Clean all tools and equipment immediately after use with a dry cloth; Xylene, mineral spirits or acetone may also be used. The cured material must be mechanically removed.
HD Adhesive Warranty
We will replace any cartridge of our adhesive caulking products free of charge if found to be non-operational or unusable for up to 6 months from the date of purchase.
“Mi nombre es Hubertino, me he dedicado en la albañeria de piedra for 35 años y mi padre fue el que me enseñó y el fue educado en el comercio por su padre, asi que soy la 3ra generación de albañil de piedras.”
Yo hago mi vida haciendo projectos de calidad para mis clientes, para que ellos los disfruten. El problema más grande que tengo al estar trabajando en Colorado es el trabajar en las diferentes épocas dificiles de nieve y lluvia. Si no tengo trabajo, no puedo darle de comer a mi familia. Yo uso “Xtreme Bond” porque me da la oportunidad de trabajar durante todo el año. No he encotrado otro producto que resista tanto como este y que funcione en la lluvia o en nieve tan facilmente. Yo uso el tubo más grande, porque uso mayor cantidad y me cuesta menos en los projectos. Yo no le queria decir a nadie sobre “Xtreme Bond” para poder tener el secreto solo para mi y no para mi competencia.”
Translation: “My name is Hubertino, I have been laying stone for more than 35 years and I was taught by my father and he was schooled in the trade by his father, so I am a 3rd generation stone mason.”
I make my living by building quality projects for my customers so they can enjoy them. A big issue I have here in Colorado is working in difficult weather like rain and snow. If I’m not on the job I’m not feeding my family. I use Xtreme Bond because it allows me to work year round and I have not found another product that holds as strong as this one and can handle rain or snow very easy. I use the larger size tube because we use so much of it and it costs much less over a project. I didn’t want to tell anybody about Xtreme so I could keep the secret for me only and not my competition.”
Hubertino Rojas
Masonry Perfection
July 2016
“I’ve been in the mason trade for 40+ years and had companies in Ohio, Florida and now Colorado. I’ve tried many adhesives through the years but with no success, either they can’t cure in cold weather or moisture/high humidity keep them from sticking to the stone. I found Xtreme Masonry glue at a trade show about 8 years ago. Couldn’t believe the claims they were making and to say I was skeptical is an understatement. We tried some samples and we’ve been using it ever since. Nothing on the market compares with it. We usually glue the stone in place during our long working days and when we come back the next day it’s set just where we left them.
“Trust this old fart, It’s the best thing out there pure and simple. We use the larger contractor cartridges because it cost less on larger jobs.
Don Collier
D&G Concrete Designs
March 2016
Related products
(3) Starting At: $7.44 USD
Reviews
There are no reviews yet.