- 1(800) 258-0344
- M-F 7:00 – 3:30 MST
This Greenwood Village, Colorado project was a complete facelift. The existing deck consisted of boring square lines and rotting floor joists. The small staircase was poorly positioned and the grill resided in a corner against the railing.
Our remodel consisted of new composite Moistureshield decking throughout and a new radius curve between pillars. The new portion of the curve is supported using custom timber post and beam work, complemented by matching knee braces. The stairs were expanded and reshaped for better and more comfortable use. The existing grill was replaced with a new built-in Wolf 30” cooktop set in a custom leathered finish granite countertop. Below the grill sits a matching Wolf warming drawer and to the side, storage doors. Supporting the grill area is more custom timber work. The underside of the deck was outfitted with a Colorado Deck Drain Experts water removal system, allowing dry space below, even in the heaviest of rains.
What really set this deck apart was the lighting. Using DEKOR™ riser lights paired with DEKOR™ post caps, ample soft light is provided. In the late evening, this project shines, thanks to DEKOR™ lighting!
The Straitline companies started in 1994 when owner Don Rasmussen founded Straitline Framing. He began building quality homes all over Colorado’s Front Range with the mission statement: A professional framing company that doesn’t follow industry standards, but instead sets standards in which everyone else is measured. Services include: single family and custom homes, commercial and multi-family units, and remodels and exterior trim. After Straitline Framing grew into a successful business, Straitline Timber was formed. Utilizing the best craftsmen in the business, the timber division offers services of: custom timber trusses, design and engineering, millwork services, and construction services.
With a broad range of skills and abilities, Straitline Custom Decks and Outdoor Living was formed. Combined with our framing and timber services, the deck division offers complete start-to-finish services which start with an initial conceptual design using industry standard software. Once we have drawn the conceptual plans to your satisfaction, we then produce final drawings for city/county approval. After your project has a permit, our in-house employed craftsmen build your project quickly and efficiently to your complete satisfaction.
We are your one stop shop! Additionally, our wide range of abilities allows us to incorporate exciting and different elements into your project to make each outdoor living space tailored to meet each client’s specific needs. Utilizing our showroom, we allow you to not only see but also touch materials you are considering for your project. No surprises! Visit www.straitlinedecks.com and call 303-565-1535 today for your free consultation! We look forward to designing and building your next outdoor living project!
For more information call:
STRAITLINE Custom Decks and Outdoor Living
Evergreen, Colorado
O. 303-670-0322
P. 303-565-1535
www.straitlinedecks.comServing Denver, Boulder, all Colorado since 1994
2655 S. Santa Fe Unit 4-A
Denver, CO 80223 USA
DEKOR®️ Canada Fulfillment
205 Champagne Drive, Unit 3A
Toronto, ON, M3J 2C6, Canada
Toll Free: 1-800-258-0344
Copyright 2024| Privacy Policy | Accessibility Statement | WordPress Web Design & Hosting Santa Barbara
Yes, DEKOR® manufactures all circuitry in Denver, CO providing excellent quality.
DEKOR® offers a COLORKONNECT WiFi controller and through the app you can dim the lights, change colors, and set schedules. You may also control light colors with dimming capability manually on the front face of the COLORKONNECT WiFi device.
When using the COLORKONNECT WiFi controller app provides you the ability to control your lights regardless of where you are located.
The 3W4PORT splitter/repeater has two functionalities: the splitter is used to connect the power wire and the three additional ports for 2-3 lights based on your lighting plan. The repeater is to be used every 20’ with long cable runs and at the light connections to enhance the signal creating pure colors from the first light to the last.
DEKOR® offers a simple 3W4PORT Plug-N-Play system with various cable lengths to make the install easy in any application.
Yes, with the use of two or more COLORKONNECT WiFi controllers and wiring two or more zones will deliver different light color patterns.
Yes, you can add to your current non-RGBW DEKOR® lighting system by adding RGBW lights! While the non-RGBW DEKOR lighting system is a 2-wire direct current system, and the RGBW DEKOR lighting system is a 3-wire direct current system, you are able to integrate both systems by creating a separate zone. Either using a splitter running from you current transformer or upgrading to a 100 or 200 watt transformer, which has more than one output from the transformer, you can create an additional zone or zones. Please call us if you need us to walk you through this!
The transconnect cable is for our standard DEKOR® Lighting 2-wire lights. The COLORCONNECT WiFi controller is a 3-wire system. The male-to-male cables come in lengths of 20”, 5’, 10’, 20’ are to be used to connect the COLORCONNECT WiFi controller and then to your first light.
For our RGBW system: The 36-watt and the 60-watt transformers will include one (1) 20’ 3WPNP male-to-male cable. The 100-watt transformer will come with (1) transconnect cable and (1) 20’ 3WPNP male-to-male cable. The 200-watt transformer will include (1) 20’ transconnect cable with two lead wires and (1) 20’ 3WPNP male-to-male cable.
The 3W4PORT splitter/repeater may only be used with the RGBW system. The 6-port splitter is a two wire and can only be used with our standard DEKOR® Lighting system.
