• Compatible with the DEKOR Non-RGBW lighting system provided a splitter is used from the transformer connection.
• DEKOR’s RGBW System is 46% brighter on average with the competition.
• COLORKONNECT WIFI controller with app provides the opportunity to dim your lights, set schedules and change colors with the ease of using your smart device.
• COLORKONNECT will control lights from anywhere in the world and power up to 60-watts of light usage. It has a built-in fuse to protect the unit from over use of voltage.
• When using the app on your smart device, there is a color wheel to change the colors and pre-set buttons for the main colors.
• Able to turn on/off or change colors manually by simply using the buttons on the faceplate of the device.
• Multiple zones can be set up by using more than one COLORKONNECT to create a variety of patterns. Do not exceed 60-watts in an individual zone.
• RGBW lights are offered in a Dek Dot and a recessed, both in a stair and up/down version.
• A 4-port/repeater is used to boosts the signal every 20’ to maintain the color from the first light to the last.
• The 4-port/repeater has one input port and 3 output ports. Two lights may be connected in the light run or 3 lights at the end of the run.
• To extend the wire use a 4-port/repeater use the one input port and one output port. Seal off the remaining two ports with the provided caps.
• Our easy 3-wire Plug-N-Play cables and connectors have an O-ring and locking collar to keep out moisture in the harshest environments. Available in cable lengths of 20”, 5’, 10’ and 20’.
• DEKOR’s RGBW is a 3-wire system with the use of 4-port/repeaters will maintain the signal so the colors are true and crisp throughout the entire system.
• DEKOR’s photocell timer can be used in conjunction with the COLORKONNECT, but will only turn the lights on/off with sun and darkness. Colors can only be changed with the app or manually on the COLORKONNECT.
• When using a 100-watt or 200-watt transformer you will need to create more than one zone with more than one COLORKONNECT to not exceed a total of 60-watts of light usage.
• You may use a 100-watt dimmable transformer with a dimmable wall switch. The switch will override the COLORKONNECT. To change colors; you must use the app or by manually pressing the buttons on the faceplate.
• With our easy Plug-N-Play cables and connectors there is no need to hard-wire.
Additional information
Weight
0.05 lbs
Dimensions
5 × .1 × .1 in
Length
3-Wire 20" Male to Male Plug N Play Cable, 3-Wire 5' Male to Male Plug N Play Cable, 3-Wire 10' Male to Male Plug N Play Cable, 3-Wire 20' Male to Male Plug N Play Cable
DEKOR® offers a COLORKONNECT WiFi controller and through the app you can dim the lights, change colors, and set schedules. You may also control light colors with dimming capability manually on the front face of the COLORKONNECT WiFi device.
The 3W4PORT splitter/repeater has two functionalities: the splitter is used to connect the power wire and the three additional ports for 2-3 lights based on your lighting plan. The repeater is to be used every 20’ with long cable runs and at the light connections to enhance the signal creating pure colors from the first light to the last.
Yes, you can add to your current non-RGBW DEKOR® lighting system by adding RGBW lights! While the non-RGBW DEKOR lighting system is a 2-wire direct current system, and the RGBW DEKOR lighting system is a 3-wire direct current system, you are able to integrate both systems by creating a separate zone. Either using a splitter running from you current transformer or upgrading to a 100 or 200 watt transformer, which has more than one output from the transformer, you can create an additional zone or zones. Please call us if you need us to walk you through this!
The transconnect cable is for our standard DEKOR® Lighting 2-wire lights. The COLORCONNECT WiFi controller is a 3-wire system. The male-to-male cables come in lengths of 20”, 5’, 10’, 20’ are to be used to connect the COLORCONNECT WiFi controller and then to your first light.
For our RGBW system: The 36-watt and the 60-watt transformers will include one (1) 20’ 3WPNP male-to-male cable. The 100-watt transformer will come with (1) transconnect cable and (1) 20’ 3WPNP male-to-male cable. The 200-watt transformer will include (1) 20’ transconnect cable with two lead wires and (1) 20’ 3WPNP male-to-male cable.
The 3W4PORT splitter/repeater may only be used with the RGBW system. The 6-port splitter is a two wire and can only be used with our standard DEKOR® Lighting system.