For Best Results
- Wear gloves during application of adhesive; once cured, material cannot be removed.
- If adhesion to a material is unknown or in question, you should do a test application first.
- Do not use in applications that require continuous submersion.
- Do not use in applications where temperatures rise above 250 ° F.
Surface Preparation
All surfaces must be structurally sound, clean, and free of dirt, loose particles, oil, grease, asphalt, tar, paint, wax, rust, waterproofing or curing and parting compounds, and membrane materials.
METAL
Remove scale, rust or other coatings to expose a bright white surface.
CONCRETE, STONE, MASONRY
Clean by grinding, sandblasting or wire brushing to expose a sound surface free of contamination and laitance.
LUMBER, WOOD
The surface must be clean and sound. Scrape away paint to bare wood.
Priming
HD Xtreme Bond Adhesive Caulk bonds well to most substrates; however, it is the user’s responsibility to check the adhesion of the cured adhesive on specific substrates.
Application
- Apply by caulking gun or trowel.
- Wearing gloves during application is highly recommended. Once Xtreme Bond has cured it cannot be removed.
- Because of the high strength provided by Xtreme Bond adhesive, do not apply it as heavily as you would a conventional adhesive. Cut the smallest possible opening in the spout to render the appropriate-sized bead. Be certain to fill all gaps between materials.
- Materials may be repositioned without loss of adhesive strength up to one hour after application.
- When necessary use mechanical fasteners to hold materials in place until the adhesive has fully cured.
Curing
Xtreme Bond forms a firm set in 1 – 2 hours, and a tenacious bond overnight. Cure time varies with temperature, humidity, and the porosity of the materials joined.
Clean Up
Clean all tools and equipment immediately after use with a dry cloth; Xylene, mineral spirits or acetone may also be used. The cured material must be mechanically removed.
Mike (verified owner) –
The best brick paver glue I have ever used over 16 years! Nothing comes close. Well worth the $.
James (verified owner) –
Product worked excellent
Nozzle was damaged in shipping and was not able to disperse using the plastic nozzle it was bent and the seal broken where it was to be dispensed
Anonymous (verified owner) –
An amazing product – I wouldn’t hesitate to use it for what it’s advertiserd for – and then some! Not cheap, but it works, and worth every penny! Even so, I paid as much for shipping as I did product – there’s a review…
Jawad (verified owner) –
Arrived on time. I’m using it to cinderblock basement windows. Sure beats mixing heavy mortar, the time and mess!
Gail (verified owner) –
The bonding in cold weather is great!
Anonymous (verified owner) –
Good communications, fast shipping
Rob Brandt (verified owner) –